Click here: File Recovery Tips
File recovery utilities take advantage of the fact that the actions performed when emptying the Windows Recycle Bin are reversible.
When a file is deleted, the operating system only changes the attribute of the space used by the file from an "occupied" status to an "available" status. The file information is hidden until it can be unlocked by a recovery utility. It is a good idea to avoid writing files to the affected drive partition to steer clear of writing over data that you wish to recover. Learn more>>
After booting from the CD/DVD you will see a Windows environment with Networking, so you can just recover your data (copy files to a USB drive or Network drive). Many other useful utilities are included besides data recovery utility: Web Browser, File Manager, Terminal Client, Partition Manager, Task Manager, Command Prompt, etc...
Read more: How to recover files?
Active@ File Recovery provides you with everything you need to effectively recover deleted or damaged data intact.
Whether the files have been accidentally deleted or lost due to a system failure or accidental formatting of the drive or other media, Active@ File Recovery provides you with the best chances possible of getting your data back. It supports many kinds of media including flash media such as the cards used in digital cameras and phones. To maximize the chances of recovering your data intact, the program can also be launched from a bootable CD.
This is especially important, since it minimizes the risk of further changing the raw data stored on the drive, including that which you are trying to recover.
This also makes it ideal for recovering data from systems which are unworkable. Active@ File Recovery uses minimal system resources while still managing to carry out its scan for recoverable data in as little time as possible. The software also supports RAW disk image creation, support for VirtualPC images, VMWARE and compressed RAW disk images.
Active@ File Recovery provides many additional features which are not found in most other data recovery solutions. This solution provides complete support for Unicode file names including all Unicode-supported multi-language character sets.
Files and folders which have names containing special characters or alphabets other than English pose no problem for this software. The software also supports the exFAT file system which is used on some flash media such as USB flash drives and flash memory cards.
Also supported are hard drives with 4096 byte sector sizes, RAW compressed images, VMWare and VirtualPC hard drive images. Using this solution, you can open these files and scan them for recoverable data just as you would with a regular physical hard disk drive.
Active@ File Recovery provides many recovery options to ensure that you have the best chances possible of recovering your lost data. The program can scan specific disk sector ranges, recover named streams and use a variety of name conflict resolution methods, renaming recoverable files as required.
If your computer will not boot up at all, Active@ File Recovery presents the perfect solution for recovering data from an unworkable system. If your computer has failed entirely due to a virus attack, power failure or other problem with your operating system, you can boot up from a CD containing the recovery software. You can recover deleted partitions as well using this feature.
Active@ File Recovery is a perfect solution for both general computer users and experts alike. It provides the advanced features that data recovery experts demand while also providing a simple and user-friendly interface which is easy to understand and navigate even for novice computer users.
There is simply no other way of effectively recovering data. To ensure that the lost data has the best chance possible of being recovered, you should see to the problem right away before it becomes permanently overwritten. Active@ File Recovery is here to save the day with its powerful set of features and tools!
Discover more about Active@ File Recovery at http://www.file-recovery.com/.
How to recover files if your USB drive is damaged or got wet?
Recovering files on a USB drive with file recovery software is as easy as with your hard drive. In order to successfully recover data from a USB drive it is necessary to determine what happened to the drive. The cause of data loss may be a broken controller or damaged file system. Let's take a look at a cause of data loss.
1. Mechanical damage
Causes: USB drivers are small and light devices which are easy to take into a pocket, but they are also easy to break. If your USB has broken you may recover files, but first of all you should repair it. You may restore all data only if NAND is not broken.
You can notice mechanical damages immediately: a modified geometry of the connector, damage to the body, etc.
Warning: Use your USB drive with care.
How to recover files if USB drive is mechanical damaged? The connector should be replaced and the data can be recovered with file recovery software. However recovery is impossible if the memory chip is damaged.
2. Thermal and electrical damage
Causes: The reason for such damages may be a poorly designed device , problems with static electricity or the proximity of the hot items.
Warning: Do not expose a USB drive to direct sun light or place it near hot objects.
How to recover files if a USB drive was thermally or electrically damaged? The connector is replaced and the data is recovered with file recovery software. However recovery is impossible if the memory chip is damaged.
3. Memory and controller failures
Causes: Each USB drive has a controller which manages flash memory and serves as an interface to the host computer. Controller is very sensitive to external influences like the power surges and static electricity. It can also fail due to internal electrical damage.
Warning: Keep in mind that the ability to record data on the USB drive is limited to a few hundred thousand times. When it is exhausted write operations start to failure. A USB drive is much more reliable in read operations rather than write ones; as excessive writing can promptly kill the drive.
How to recover files if NAND and controllers of USB drive have failed? YIn case of internal damage you wouldn't be able to restore data with software, though sometimes this kind of failures are intermittent meaning that you have a chance to get your data back with recovery software if you act quickly.
4. USB drive malfunction of logical character
Causes: The file system can be corrupted due to unsafe or premature extraction of the USB stick, the voltage surges and outages or due to user actions.
The USB drive is not damage but file system recognized it as an unformatted or blank and you can't to get access to your data.
Warning: Extract the USB drive from a computer safely (use Eject operation first).
How to recover files? If USB drive file system is corrupted the operating system will not recognize the drive even if it is physically undamaged. Moreover, the operating system (Windows) can prompt a user to format a USB drive. DO NOT do it unless you are sure that there is no data on your USB drive. Try to search data on the USB stick with recovery software first.
5. Water inside
Causes: Moisture is one of the worst enemies of HDD and USB drives. It becomes a cause of corrosion of electronic components and details.
Warning: Keep your USB drive far from water.
How to recover files? Dry the wet USB drive first then, if it is working, make a copy of data from it. Remember that corrosion can continue to develop inside even if the USB drive is operational and eventually lead to a failure.
How to recover files properly?
To recover deleted files from hard disks you can use file recovery software. But you should keep in mind that recovering files is an important process. It requires a special attention from you.
For example, the effect of recovery after an accidental or inadvertent formatting is determined by the location of files on your hard drive.
Files can be fragmented or non-fragmented on the disk. Fragmented files are tend to yield a partial recovery, while the fragmented files can be restored as a whole.
These guidelines will help you recover deleted files properly.
- While recovering deleted files do not save data that you found and hope to recover onto the drive where they were deleted. It can damage other files or data in FAT/MFT. Best of all save recovered files onto another logical, removable, network or USB drive.
- While recovering deleted files you should abstain from writing any data or install software onto the drive containing your important data that has just been accidentally deleted.
Installation of data recovery software or writing other files could make your deleted files unrecoverable. Our suggestion: take the whole hard drive out of the computer and plug it into another computer with data recovery software or use a bootable floppy with file recovery software.
- While recovering deleted files remember that you might not be able to access data on the volume if either MBR or boot sector is corrupted.
- Do not perform defragmentation of a hard disk containing deleted files you are going to recover. Defragmentation will drastically decrease chances of successful recovery.